Product Information

Specification

JIS C 3410 0.6/1KV (FA-)DPYCYSLA Shipboard Flame Retardant Power Cable

Application Standard:

• • Design guide : JIS C 3410(2010)
• • Flameretardant : IEC60332-1, : IEC 60332-3 Category A (FA-Cables Only)
• • Cold bend/impact : CSA 22.2 No. 03 (-40℃/-35℃) (Cold TypeOnly)
• • Max. rated conductor temperature : 90℃

Also Known As:

Shipboard Cables, Tinned Annealed Copper, JIS C 3410 Cable, 3410 0.6/1KV Cable, Flame Retardant Cable, Power Cable

Conductor:

• • Code : D,T
• • Stranded tinned annealed copper wires as per JIS C 3410(2010)
• • A suitable tape may be applied on the conductor

Insulation:

• • Code : P
• • EPR as per JIS C 3410(2010)
• • Insulated conductors shall be cabled

Cabling:

• • Flame retardant & non-hygroscopic fillers may be used
• • - Suitable tape(s) may be applied on the cabled core

Commonshield:

• • Code : SLA
• • Screened by AL/PS tape with tinned copper drain wire
• • A suitable tape may be applied on the common shield

Sheath:

• • Code : Y
• • PVC as per JIS C3410(2010)

Armour:

• • Code : C
• • Braid of galvanized steel wire(C)
• • Coverage density : Min. 90%

Paint:

• • The white paint shall be painted uniformly on the steel wire braid
• • In case of PVC protective covering cable, paint isdispensable

Protective Covering:

• • Code : Code : Y
• • PVC as per JIS C3410(2010)
• • Protective covering color : Black
• • Any other color may be applicable when purchaser required

Core identification:

• • No. of cores: 2C, Insulation Color: Black, White
• • No. of cores: 3C, Insulation Color: Black, White, Red

*Data provided on this page is subject to change based on different manufacturers' variances

** Images are for display purposes only refer to Product Technical Details for accurate information on the product.