Product Information

Specification

Igus Stranded Bare Copper Shield TC Braid 50V PVC USB 3.0 Bus Cable

Also Known as:

USB 3.0 Cable, Chainflex Cable, Chainflex® USB 3.0 Cable, Bus Cable, Flexible Cable, IGUS Cable, Continues-Flex Cable, Dynamic Cable, Flexing Cable, Flex Cable, Linear Motion Cable

Description:

PVC Bus cable | USB 3.0
 
Typical application areas

• USB 2.0 cable for use in e-chains® in an industrial environment
• Transmission lengths CFBUS.065 of up to 5 m
• Transmission lengths CFBUS.066 of up to 10 m

Technical Note:
The USB, FireWire, and GigE cables listed on this page have been developed and manufactured for mechanically demanding industrial use in e-chains®. High resistance to oil and lubricants is guaranteed, as is also a high degree of protection against electro-magnetic interference fields. This high mechanical service life was reached with the usage of high quality materials which even care for the electrical safeness. In single cases communication errors can occur, if very different hardware and software is combined. We therefore recommend that all the components of the overall system are first tested with the cables.

Construction:

Conductor: Stranded conductor in especially bending-resistant version consisting of bare copper wires (following EN 60228).
Core insulation: Mechanically high-quality TPE mixture.
Core stranding: Cores and pairs stranded with an especially short pitch length.
Core identification: Cores 0.5 mm2: red, black.
Cores 0.08 mm2: white, green (CFBUS.065).
Cores 0.24 mm2: white, green (CFBUS.066).
Overall shield: Extremely bending-resistant braiding made of tinned copper wires.
Coverage approx. 70% linear, approx. 90% optical.
Outer jacket: Low-adhesion mixture on the basis of TPE, especially abrasion
resistant and highly flexible, adapted to suit the requirements in e-chains®. Colour: Red lilac (similar to RAL 4001)

Properties and Approvals:

UV resistance: Medium
Oil resistance: Oil resistant (following DIN EN 60811-404), bio-oil resistant
(following VDMA 24568 with Plantocut 8 S-MB tested by DEA), Class 4
Flame retardant: According to IEC 60332-1-2, CEI 20-35, FT1, VW-1
Silicone-free: Free from silicone which can affect paint adhesion (following PV
3.10.7 – status 1992)
UL/CSA: Style 1589 and 21371, 30 V, 80 °C
NFPA: Following NFPA 79-2012 chapter 12.9
CEI: Following CEI 20-35
Lead free: Following 2011/65/EC (RoHS-II)
Cleanroom: According to ISO Class 1. Outer jacket material complies with
CF34.UL.25.04.D, tested by IPA according to standard 14644-1
DESINA: According to VDW, DESINA standardisation
CE: Following 2014/35/EU

*Data provided on this page is subject to change based on different manufacturers' variances

** Images are for display purposes only refer to Product Technical Details for accurate information on the product.