Product Information

Specification

10/2 NMD90 W/GRND Copper Building Wire 300V

Applications:

• Two or three copper conductors with 90C XLPE (R90) insulation. Bare bonding wire and overall jacket
• moisture resistant and flame retardant PVC, with an FT1 rating.
• For open or concealed wiring in dry or damp locations where not exposed to mechanical injury.
• Approved for use with ceiling fixtures.
• The maximum allowable conductor temperature is 90°C.
• The minimum recommended installation temperature is -25°C for two-conductor cables and -10°C for three conductor cables (with suitable handling procedures).
• The material should be properly stored above 0°C for 24 hours prior to installation.
• The maximum voltage rating for all intended applications is 300 volts. Consult the Canadian Electrical Code1
• For further information related to applications.

Also Known As:

10/2 NMD90 Cable, NMD90 Copper Building Wire, NMD90  Wire, Canadian Wire, NMD90 Canadian Cable, NMD90 Jacketed Cable, NMD90 300V Wire, Bare Bonding Wire, NMD90 XLPE Insulation Cable, ROMEX NMD90 Wire, NMD90 W/GRND Wire, Part No: 7557301, 7411129.

Construction:

Conductors:

Two Or Three Conductor Cables, Bare Grounding Conductor, Annealed (Soft) Copper Conductors, Compressed Standing For Stranded Conductors, Conductors Are White, Black And Red (For 3 Conductor Cables), Conductors Are White, Black (For 2 Conductor Cables)

Insulation:

The cable has a white PVC Nylon T90 insulation with an FT1 rating. The insulation is resistant to ozone, chemicals, radiation, weather, acids, alkalis, impact, abrasion, industrial solvents, oils, flames, PVC / NYLON INSULATION

Jacket:

• White Colore Polyvinyl Chloride (PVC) Jacketed For The Overall Construction, PVC/Nylon Jacket Insulation For The Individual Conductors, PVC JACKET.

Standards:

• ASTM
• CSA C22.2 No. 48 (non-metallic sheathed cable)
• Canadian Electrical Code1
• FT1 rating

Specifications:

• Size: 10 AWG
• Number of Conductors: 2
• Conductor Stranding: 1
• Insulation Thickness: 0.034 inches
• Jacket Thickness: 0.030 inches
• Overall Dimensions: 0.481 x 0.230 inches
• Allowable Ampacity (30°C Ambient):  40*
• Weight: 122 lbs/1000ft

*Data provided on this page is subject to change based on different manufacturers' variances

** Images are for display purposes only refer to Product Technical Details for accurate information on the product.

In the case the material only comes in a predetermined color or doesn’t come with any color