Product Information

Specification

10 AWG THHN THWN-2 PULLPro Copper Solid Building Wire

Allowable Ampacity:
30 Amps at 60ºC / 30 Amps at 75ºC / 30 Amps at 90ºC

Also Known As:

10 THHN, 10 AWG THWN-2, 10 AWG THHN, 10 Solid THHN, 10 Gauge Solid Wire, 10 Copper Wire, 10 AWG Solid Copper Wire, 10 AWG Copper Wire, 10 AWG Building Cable, 10 AWG Conduit Wire, 10 AWG Nylon Wire, 10 AWG Construction Cable, 10 AWG Thermoplastic-Insulated Copper Wire.

• Unique coil pattern allows for a tangle-free and memory-free pull, retaining weight distribution and improving balance

• PullPro fit together for a solid, steady multi-conductor pull

• Shrink-wrapped inner coil allows wire to be pulled with or without the case

• Protect your investment; no spool to break, no wire to scrap

Packing Futures:

Shrink-wrapped inner coil allows wire to be
pulled with or without the case
Centered, form-fitting grip handle
Pocket to secure wire between pulls
Reduced coiling memory

Available in 14 AWG, 12 AWG and 10 AWG, Solid and Stranded. All PullPro circuit wire comes in our slick but never slippery or greasy SuperSlick Elite® and weighs less than 30 lbs for better handling and increased safety.

Pulling & Stacking:

PullPro cases fit together when pulling multiple conductors. Stack PullPro Cases for a horizontal pull, arrange in an "X" pattern or side-by-side for a vertical pull.

Improved Balance:

Packaging sits upright making it safer and easier to lift. PullPro retains weight distribution during pull, improving balance.

Footage Estimator:

Track your remaining wire with the Footage Estimator

Description

THHN stands for Thermoplastic High Heat-Resistant Nylon. Recognized for its versatility and durability, it is one of the most commonly used building cables. The double marking THHN / THWN-2 means it is suitable for wet and dry conditions (the "W" indicates water-safe). This cable is corrosion-resistant, tolerates dryness and chemicals, and is rated for up to 90°C in both wet and dry environments. It operates at up to 600 volts, making it reliable for a range of applications.

Why Solid Wire?

• Provides consistent, low-resistance conductivity for permanent installations.

• Simplifies connections to switches, outlets, and breakers.

• Best suited for stable environments with minimal movement.

Common Uses for 10 AWG Solid Wire

• Residential Appliances: Suitable for medium-duty appliances like electric ovens and water heaters.

• HVAC Systems: Supports smaller residential or light commercial systems.

• Lighting Circuits: Reliable for residential and commercial lighting.

• Conduits: Designed for structured wiring with straight conduit runs.

• Branch Circuits: Distributes power from service panels to outlets, switches, and fixtures.

Construction

Conductor:
Made of annealed soft copper, meeting ASTM B3 and ASTM B8 standards.

Insulation:
PVC insulation with a flame-retardant, sunlight-resistant, lead-free thermoset jacket. The jacket is color-coded as per ICEA Method 4 for easy identification.

Standards

• ICEA S-73-532

• UL 1277: Flame, moisture, and sunlight resistance.

• UL 1581, UL 83, UL 1063, UL 758

• ASTM B3 and B8: Copper conductor standards.

• ANSI/NFPA 70: Safe electrical design.

• RoHS Compliant

• Approved for NEC Class I and II systems.

• Allowed for Exposed Run (ER) and use in Division 2 hazardous locations.

Specifications

• Size (AWG): 10

• Outside Diameter: 3.78 mm / 0.149 inches

• Cross-Section Area: 5.26 mm²

• Conductors: Annealed soft copper

• Stranding: Solid

• Insulation Thickness (PVC): 0.380 mm / 0.015 inches

• Nylon Thickness: 0.100 mm / 0.004 inches

• Jacket: PVC

• Weight (lbs/1,000 ft): 39

*Data provided on this page is subject to change based on different manufacturers' variances

** Images are for display purposes only refer to Product Technical Details for accurate information on the product.

In the case the material only comes in a predetermined color or doesn’t come with any color