HELUKABEL MULTISPEED 500-C-TPE Drag Chain Cable

HELUKABEL MULTISPEED 500-C-TPE Drag Chain Cable

Applications:

For permanent application in drag chains for long distances, high and low speed of movements. These cables are installed in dry, moist and wet rooms and in open air with free movement without tensile stress or forced movements. These robust and abrasion resistant special control cables are installed there, where the problems appear for the application in permanent stresses e. g. in energy drag chains. These cables are installed everywhere, where high requirements for the flexibility, abrasion, oxygen and chemical resistance are necessary. EMC = Electromagnetic compatibillity To optimize the EMC features we recommend a large round contact of the copper braiding on both ends.( = The product is conformed with the EC Low-Voltage Directive 2006/95/EC.

Also Known As:

HELUKABEL MULTISPEED 500-C-TPE, MULTISPEED 500-C-TPE datasheet, HELUKABEL drag chain cable TPE, HELUKABEL control cable high flex, 500-C-TPE UL CSA cable, HELUKABEL 500-C-TPE specifications, MULTISPEED 500-C-TPE technical data, HELUKABEL robot cable TPE sheath, high flex TPE control cable HELUKABEL, HELUKABEL 500-C-TPE distributor.

Technical Data:

Special drag chain cables for high  mechanical stress adapted to DIN VDE 0285-525-2-51 /
DIN EN 50525-2-51

Temperature range
flexing -30°C to +80°C
fixed installation -40°C to +80°C

Nominal voltage
U0/U 300/500 V 

Test voltage 
3000 V

Insulation resistance
min. 100 MOhm x km

Minimum bending radius
flexing 5x cable Ø
fixed installation 3x cable Ø

Coupling resistance
max. 250 Ohm x km

Radiation resistance
up to 100x106 cJ/kg (up to 100 Mrad)

Cable Structure:

• Tinned copper, fine wire conductors, Unilay with short pitch length
• Core insulation of special PP 
• Core identification black cores with friction-resistance
• Temperature range continuous white numbering
• GN-YE conductor, 3 cores and above
• Stranding: <7 cores: cores stranded in a layer with optimal lay-length around a filler as per construction
≥7 cores: cores stranded with optimal lay-length to bunch-construction with low
torsion strength, optimal selected short lay-length around a filler
• Inner sheath of special-TPE , extruded as filler with pressure, natural colour
• Screen of Cu braid tinned, coverage 85% max., with optimal pitch
• Fleece separator, ensure good dismantling ability
• Outer sheath of special-TPE-O extruded as filler with pressure
• Sheath colour ocean blue (RAL 5020)
•  with meter marking
• TPE: The selected tinned copper wire conductor permits the installation in aggressive environments as well as hydrogen sulfide, ammonia and sulfur dioxide

Properties:

• Microbe-resistance - TPE
• High property of alternating bending strength
• Long life durabilitys due to low friction-resistance
• High tensile strength, abrasion- and impactresistance at low temperature
• Low adhesion, oil resistence
• Tear resistance
• Better chemical resistance
• UV and ozone resistance
• Reduced Ø, results low weight of moving materials
• The materials used in manufacture are cadmium-free and contain no silicone and free from substances harmful to the wetting properties of lacquers

Note:

• AWG sizes are approximate equivalent values. The actual cross-section is in mm²
• G = with green-yellow conductor
x = without green-yellow conductor (OZ)
• Please note the cleanroom qualification when ordering.
For more information, see introduction
• unscreened analogue type: MULTISPEED 500-TPE